在家测量

我们有一份全面的指南，教您如何测量您喜欢的服装。这份指南尽可能详细，一旦您将测量结果发送给我们，请放心，我们经验丰富的裁缝将审核您的输入，以确保一切顺利进行。

经常问的问题

它是如何工作的？

我们经常被问到“我家里有一套非常漂亮的西装，你能复制它吗？”。现在，这从未如此简单。

我们已经列出了定制服装所需的所有尺寸。目前，我们通过“在家测量”系统提供两件套西装。只需按照上述指南操作，查看图片，然后提交您的尺寸即可。
如果不正确怎么办？

请放心，我们经验丰富的裁缝会仔细检查您提交的尺寸，以确保它们“看起来”正确。凭借数十年的西装测量和试穿经验，我们已经培养出发现奇怪（罕见）错误的敏锐眼光。
我已经提交了我的测量结果。接下来该做什么？

提交尺寸后，请随意浏览我们提供的产品，选择材料，然后设计款式。如果您想更详细地讨论选项，请随时与我们联系。

夹克

CUSTOM JACKET

Shoulder Width

Measure from where the shoulder seam hits the sleeve

across to the opposite shoulder. Follow the rounding of

the back.
CUSTOM JACKET

1/2 Back

Measure from where the side seam

meets the armhole until the centre back in an angle of 90º
Custom Jacket

1/2 Waist

Measure the waist with the jacket unbuttoned.

First, Measure from the front to the side panel.

Then, measure from the side seam right angled

to the back side seam.

Lastly, measure from the back side seam right

angled to the centre back seam.
Custom Jacket

Back Length

Measure from the bottom of the melton (cloth under

the collar) down along the centre back seam down

the length of the jacket.

Tip: The length of a jacket is usually within 1” of the

inside leg measurement.
Custom Jacket

Sleeve Inseam

Measure from the armpits until the cuff alongside

the inseam of the sleeve.

裤子

custom trousers

1/2 Waist

First lay the trousers flat, and buttoned-up, and

ensure the waistbands are even and face up.

Measure the waistband in two steps;

First, one side to centre-front.

Then, Centre-front to the opposite side.

Hold the measuring tape alongside

the bottom of the waistband.
Tell your story

1/2 Thigh

Lay the trousers flat with the full front panel face up (not

folded on the trouser crease). Measure along the inseam

4-inches down from the inside crotch seam, and use a pin

to mark the spot. Measure the thigh in a right angle to

the front panel crease. Make sure you pull the creases

and pleats out while measuring, without stretching

the fabric.
custom trousers

1/2 Knee

Lay the trousers flat with the full front panel face up

(not folded on the trouser crease). Measure along

the inseam 13 3/4-inches down from the inside

crotch seam, and use a pin to mark the spot.

Measure the knee in a right angle to the front panel

crease. Make sure you pull the creases and pleats

out while measuring, without stretching the fabric.
Custom trousers

1/2 Bottom

Measure the hem width, with the trouser folded

on the front and back crease.

与往常一样，如果您需要有关这些说明的任何帮助，或者需要进一步说明，请随时与我们联系。我们很高兴能够提供帮助。